Start by cleansing your eyelids and making sure they are free of oil and makeup. This will help ensure the magnetic lashes adhere properly.
-
Apply Eyeliner:
- Apply the eyeliner as close to your natural lashes as possible.
- Draw a line as thick as the magnets on the lashes, making sure to cover the entire eyelid so that the magnets on the lash band can hold.
- Wait 20-60 seconds, depending on the amount of eyeliner you used. The eyeliner should be about 80% dry.
-
Prepare the Lashes:
- Carefully remove the lashes from the lash case.
- Bend the lash band slightly to make it softer and to fit your eye shape.
-
Place the Lashes:
- Place the center of the magnetic eyelash on the center of your eyelid.
- First make contact with the lashes at the outer corner of the eye, then gently press the lashes into place at the inner corner.
- Make sure to get the lashes as close to your natural lashes as possible. You can pinch the natural and magnetic lashes together to ensure a tight and natural fit.
Removal:
- Gently pull the lashes off your eyes.
- Clean your eyelids with an oil-based makeup remover.
Cleaning:
- If there is dried eyeliner on the magnets, use your thumbnail to scrape off as much as possible.
- Use a makeup wipe to gently clean off any residue on each of the magnets.